Product

Automated Nucleic Acid Extraction Workstation SAW-96



Introduction

The Automated Nucleic Acid Extraction Workstation SAW-96 (referred to as "SAW-96" below) produced by Jiangsu Bioperfectus Technologies Co., Ltd. is an in-vitro diagnostic medical device that integrates cutting-edge mechanical, electronic, and software technologies. SAW-96 integrates sample loading, nucleic acid purification, and PCR setup functions in one instrument. The typical run duration is less than 70 minutes for 1-96 samples. Based on experienced magnetic separation technology, SAW-96 provides high throughput automation combined with high performance. It will promote laboratory productivity to meet changing needs. With non-contact dispensing of samples, reagents, and PCR reagents, it will be safe and simple for the operators and save time and money for the laboratory.

 

 

Scope of application: The equipment is intended for automatic extraction workflow. It can realize automated operations from primary sample tubes to nucleic acids extraction and PCR setup.

 

Features
  • Walk-away workstation: one instrument from primary sample tube to PCR ready-to-go tube, including sample loading, nucleic acid purification, and PCR setup operations
  • High efficiency: 1-96 samples with the whole process in 70 minutes
  • User-friendly design: visual interface with functions real-timely shown in software
  • Better contamination control: UV light, HEPA filter, and the electrostatic filter will help prevent the inside environment from aerosols. Scientific zoning, a pipette device equipped with a leak-proof design, and filter pipette tips will enhance the anti-cross-contamination level.
  • Quality commitment: 18 months warranty

 

Parameters
Size (L x D x H) 1,130 x 680 x 690 (mm)
Weight 110.8 kg
Sample throughput 1-96
Cooler control Keep 4 - 15 °C for the reagent station and 4 - 8 °C for the PCR setup station.
Contamination control

The nucleic acid extraction and solution dispensing operations are performed strictly in separate areas.

A built-in medical purifier consists of two UV disinfection modules with a timer, two HEPA filters, and one high efficiency & high voltage electrostatic sorption particulate air filter with four fans.
Voltage 100-240 V AC
Frequency 50-60 Hz
Rated power 1,210 VA
Sampling Function  
Compatible sample tube Sample tubes and centrifuge tubes, such as 1.5 ml tubes, 5 ml tubes, and tubes with 16mm diameter.
Sample Types Plasma, serum, whole blood, swab, urine, etc.
Extraction Function  
Magnetic bead recovery efficiency ≥ 98%
Processing volume 20-1,000 μL
Mixing mode Oscillating mixing with multiple modes and speeds (> 20 gears)
Compatible kit Bioperfectus magnetic bead-based nucleic acid extraction kits
Heating temperature

Heating temperature for lysis: room temperature to 120°C
Heating temperature for elution: room temperature to 120°C
Pipetting Function
 
Sample Loading Channels
1-2
Reagent tube

1.5 ml, 2 ml, 5 ml EP Tubes

0.2 ml PCR tube 
Dispensing volume of plunger pump
1-250 μL  
Positional accuracy
±0.1 mm on the X-Y-Z axis

 

Certificates

NMPA, CE, FDA Listed